SOLVING THE LAST MILE CHALLENGE

The market is hungry for growth but the existing technologies create a significant growth barrier

Technology that enables broadband over coaxial cables has been developed and become a real and cost-effective way for connection. With its large distribution and the capacity to deliver broadband at up to 100 Gbps in the long term, coaxial cables are largely an unused resource in the broadband expansion in Europe.

Fiber Access Extension Over Coax

The coaxial cable is generally a high quality information link provider. It is (in theory) capable of up to 100 Gigabit data throughput, available in most homes, apartments, hotels and commercial buildings.

Using the coaxial cable for broadband access provides non-intrusive and inexpensive installations with fast deployment. It is the sustainable choice for fiber extension with minimal environmental impact as the the existing cables are used.

Coax enables Gigabit per second (Gbps) speed fiber access extension when Fiber To The Home (FTTH) and Fiber To The Building (FTTB) is not possible all the way through fiber.

MoCA Access™ 2.5 standard

The MoCA Access 2.5 standard was created to solve the Last mile challenge. It is capable of 2.5 Gbps data speed using the existing in-building coaxial cabling.

MoCA Access is a point-to-multipoint system standard serving up to 63 modems (clients). It is designed to co-exist with legacy services such as cable- and satellite-TV, DOCSIS, and cellular (4G/5G) technologies. The operating frequency range is 400 – 1675 MHz. It has low latency (delay less than 5ms) and is nearly symmetrical, throughput is up to 2.5 Gbps downstream and 2 Gbps upstream.

In:xtnd™ is based on this standard.

Introduction in:xtnd

EASY TO INSTALL,
NO NEW CABLES

FAST AND SYMMETRIC
GIGABIT PERFORMANCE
SMART, SUSTAINABLE
AND COST-EFFICIENT

A COMPLETE RANGE OF PRODUCTS
FOR GIGABIT FIBER ACCESS

NEW and improved in:xtnd control

New in:xtnd Control C251

  • Improved link budget when combined with in:xtnd Access A101 modem
  • 17dBm output power
  • Improved filters to minimize signal interference
  • Integrated brackets for easy mount
  • Approved for both Europe and North America
  • Fully compatible with previous in:xtnd versions

In:xtnd Control

Reliant broadband over coax access nodes 
In:xtnd Control is a broadband over coax access node, capable of 2.5 Gbps per RF-port.
In:xtnd Control communicates with up to 31 in:xtnd Access modems per channel. 
In:xtnd is based on the MoCA Access™ 2.5 standard (Profile D). The in:xtnd Control 4 channel supports up to 124 in:xtnd Access modems. It is also available in a 1-channel version supporting up to 31 in:xtnd Access modems.

IN:XTND CONTROL C251 NEW!
MoCA bands: A-A, A-B, A-C, A-D, A-E
Frequency range: 400-1675 MHz
Coax channel: 1 x 2,5 Gbps
Access modems: 31 pcs

APPROVALS
Marking: CE, FCC, IC, cNUS
EMC: EN55032:2015 Class A, EN55035:2017, FCC Part 15 B Class A, ICES-003 Class A
Safety: IEC62368-1:2014, EN62368-1:2014 + A11:2017, AS/NZS 62368.1:2018, CSA/UL 62368-1:2014
ROHS: ROHS 2.0

IN:XTND CONTROL MA 2.5 4 channel
MoCA bands: A-A, A-B, A-C, A-D, A-E
Frequency range: 400-1675 MHz
Coax channels: 4 x 2,5 Gbps (10 Gbps total)
Access modems: 31 pcs/channel (124 total)

APPROVALS
Marking: CE, FCC, IC, cNUS
EMC: EN 300386 V2.1.1, EN 55032:2015, EN 55035:2017, FCC Part 15B Class A
Safety:
EN 60950-1:2006/A11/A1/A12/A2, IEC 62368-1:2014, EN 62368-1:2014+A11:2017, CSA/UL 62368-1:2014
RoHS: EN 50581:2012

In:xtnd Combine

High performance frequency combiners
Combine is a family of high performance di- and triplexer filters. The in:xtnd Combine is designed to be used for connecting one or two MoCA Access channels from an in:xtnd™ Control and FM/VHF into a single coaxial cable. This enables TV and gigabit broadband traffic to run through the same coax cable.

In:xtnd Combine A-A, A-C: 400-900, 1025-1675 Mhz
In:xtnd Combine A-B: 800-1675 Mhz
In:xtnd Combine A-C: 1025-1675 Mhz
In:xtnd Combine A-D: 1125-1675 Mhz

F-connectors, 3/8″-32UNEF thread

NEW and improved in:xtnd access modem

New in:xtnd Access A101

  • Improved link budget when combined with in:xtnd Control C251

  • Improved filters to minimize signal interference

  • Bracket included for easy mount

  • Approved for both Europe and North America

  • Fully compatible with previous in:xtnd versions

In:xtnd Access

Reliable coax to ethernet modems
In:xtnd™ Access is a family of reliable Coax to Ethernet Media Converters. In:xtnd™ Access modems are capable of 1 Gbps speed communication on each LAN output. They communicate with in:xtnd™ Control units based on the MoCA Access™ 2.5 standard (Profile D). It connects to any antenna outlet for easy self installation. It is remotely configurable and the pass through RF/VHF output supports all existing TV standards.

IN:XTND ACCESS MA 2.5 2 CAM2522 

MoCA bands: A-A, A-B, A-C, A-D, A-E
Frequency range: 400-1675 MHz
Ethernet ports: 2 x 1 Gbps

APPROVALS 
Marking modem: CE, FCC
Marking power supply: CE, FCC; IC, ETL, UL (US/CA)
EMC: EN55032:2015, EN55035:2017, FCC Part 15 Class B, ICES-003 Class B
Safety: EN60950-1:2006/A11/A1/A12/A2, EN50581:2012, UL60950-1 1st ed, CAN/CSA-C22.2 NO.60950-1
ROHS: ROHS 2.0

IN:XTND ACCESS A101-IP   NEW!
MoCA bands: A-A, A-C
Frequency range: 400-900, 1025-1675 MHz
Ethernet port: 1 x 1 Gbps

IN:XTND ACCESS A101-AA   NEW!
MoCA bands: A-A
Frequency range: 400-900 MHz

Ethernet port: 1 x 1 Gbps

IN:XTND ACCESS A101-AC  NEW!
MoCA band: A-C
Frequency range: 1025-1675 MHz
Ethernet port: 1 x 1 Gbps

IN:XTND ACCESS A101-AD – NEW!
MoCA band: A-D
Frequency range: 1125-1675 MHz
Ethernet port: 1 x 1 Gbps

APPROVALS 
Marking: CE, FCC, IC, ETL
EMC: EN55032:2015 Class B, EN55035:2017, FCC Part 15 Class B, ICES-003 Class B
Safety: IEC62368-1:2014, EN62368-1:2014, UL60950-1 1st ed, CAN/CSA-C22.2 NO.60950-1
ROHS: ROHS 2.0

In:xtnd Manage

Provisioning and Control System
The in:xtnd Manage is an advanced cloud based element manager with features for in:xtnd Control deployment, service-based in:xtnd Access deployment, control and supervision of the coax link conditions. In:xtnd Manage includes essential functions for service provisioning and network management.

Automatic element deployment
Advanced service and policy management
XML-SOAP interface for fast and easy third-party OSS/BSS integration
Wide range of network statistics

ARE YOU READY TO GET ENGAGED?

LEGACY models – 1900 series

InCoax CLC1924
Coax Link Controller – Broadband access for MDU units and Hotels. Delivers IPTV, VoIP and broadband services at 700Mbps on four coax ports.

InCoax CAM1914
Coax to ethernet media converter modem. Front-end to Media Gateway, IPTV box or Wireless Router. Remotely configurable access port. Easy self-installation.

InCoax CAM1944
4-port ethernet switch to IPTV box, IP-telephony or Wireless Router. Remotely configurable Ethernet port. Remotely selectable RF-bands. Easy self-installation.

Coax Linc Manager
Provisioning and control system. For deployment, network management and supervision of the coax linc conditions.

DO YOU NEED MORE INFORMATION? LEARN MORE BELOW!

DOWNLOADS

Product sheets
Brochures

Films

Interviews

News flash

FAQ

We are complimentary. You can keep your existing TV-services and upgrade to 2.5 Gbps broadband with minimal disturbance and at a significantly lower deployment cost.

Recently we were elected to the Board of Directors of Broadband Forum. Also, we have had a seat on the Board of MoCA® since the beginning of 2018. These types of forums are important as we can influence the establishment of standards and remain at the forefront of technological development.

We are proud to be using the existing infrastructure. It is smart and sustainable to utilize the coaxial cables as the main source of fiber access extension. This is a major advantage compared to most alternative solutions. Also, we strive to reduce the amount of energy/power that is required for all our products.
With in:xtnd we can make the Gigabit society a reality today without complications. Gigabit networks can be available to everyone, not only to those where an FTTH solution is available.

DO YOU HAVE A QUESTION?